Metal roofing prices in Long Beach vary based on material, roof size, complexity, and whether you need installation, repair, or replacement. Most projects fall within a predictable range, and we provide transparent starting prices to help you budget with confidence.
Pricing guide
These rates are indicative. Every job is unique: size, access, complexity. Request a free estimate for exact pricing tailored to your situation.
| Service | Price | Details |
|---|---|---|
| Metal Roof Installation | From $8/sq ft | Complete metal roof installation for homes across Long Beach and the South Bay: panel systems selected for coastal salt air and strong UV, installed over high-temperature synthetic underlayment with proper ventilation, corrosion-resistant fasteners and carefully lapped flashing for a long service life by the shore. |
| Standing Seam Metal Roofing | From $10/sq ft | Concealed-fastener standing seam systems, a premium choice for Long Beach homes. Panels roll-formed to length and mechanically seamed or snap-locked, with no exposed screws for salt air to attack and a cool reflective finish that handles the strong coastal sun and Santa Ana gusts. |
| Metal Roof Replacement | From $9/sq ft | Full tear-off and replacement of worn composition shingle, broken clay tile or end-of-life metal roofs: old roofing hauled away, decking inspected and repaired, then a complete new metal system installed. Many California carriers recognize fire- and impact-rated roofs, so ask yours. |
| Metal Roof Over Shingles (Retrofit) | From $7/sq ft | A new metal roof installed directly over your existing composition shingles with no tear-off, less waste and lower cost. Popular on Long Beach tract ranches. We check deck condition first and tell you honestly when tear-off is the better call. |
| Metal Roof Repair | From $450 | Repair of damaged, loose or wind-hit metal roofing: replacing dented or punctured panels, resealing seams and penetrations, and fixing failed flashing before a winter atmospheric-river storm turns a small gap into interior damage. |
| Metal Roof Leak Repair | From $450 | Priority leak response for metal roofs: leaks traced to their true source (failed fasteners, seam separation, flashing gaps, pipe boots and parapet transitions) and fixed right, not just caulked over. Emergency tarping available ahead of and after heavy winter rain. |
| Screw Replacement & Re-Fastening | From $750 | Long Beach's salt air and daily temperature swings loosen screws and corrode washers on older exposed-fastener roofs, and Santa Ana winds work them further. Oversized corrosion-resistant screws and UV-resistant washers fix it for a fraction of replacement cost. |
| Corrugated & Ribbed Panel Roofing | From $5.50/sq ft | Exposed-fastener metal roofing (corrugated, R-panel and 5V) is the budget-friendly workhorse for garages, patio covers, workshops and light industrial buildings around the Port and South Bay. Coastal-grade coated panels in reflective colors, installed with proper screw patterns and closures. |
| Metal Shingle Roofing | From $9/sq ft | Metal shingles that give the look of architectural shingles, slate or shake with the lifespan of steel, a favorite for Long Beach homeowners who want metal performance without the standing seam look. Lightweight, walkable and wind-rated for coastal gusts. |
| Stone-Coated Steel Roofing | From $9/sq ft | Stone-coated steel systems combining steel strength with a textured traditional finish: excellent wind performance, a Class A fire rating, and profiles that mimic the Spanish clay tile and shake looks common on Long Beach homes, at a much lighter weight than clay. |
| Copper & Specialty Metal Roofing | From $20/sq ft | Copper, zinc and aluminum roofing for accents, porches, bay windows and full architectural roofs: premium metals that weather to a living patina and stand up well to salt air. Custom fabrication for the fine details on Long Beach's historic homes. |
| Metal Roof Coating & Painting | From $2.50/sq ft | Restoration of sun-faded, chalking or surface-rusted metal roofs: surface prep, rust treatment and high-performance reflective coating systems that extend roof life, restore color and cut summer heat gain without replacement. |
| Flashing, Chimney & Skylight Repair | From $600 | Repair and custom fabrication of flashing around chimneys, skylights, valleys, parapet walls and stucco transitions, the number one leak point on Long Beach roofs when winter storms arrive. In-house bent flashing for a precise watertight fit. |
| Snow Guards & Ice Protection | From $1,200 | Long Beach never needs snow guards, so this is about what does apply: reflective cool-roof coatings and roof-edge and ridge fastening details that resist Santa Ana wind uplift and shed heat. Honest guidance on whether your roof needs any of it. |
| Storm & Wind Damage Repair | Free inspection | Repair of wind and storm damage to metal roofing, from Santa Ana gusts and winter downpours: thorough documentation with photos, an honest assessment of repair vs. replacement, and help documenting your insurance claim from inspection to completed work. |
| Metal Roof Inspection | Free estimate | Complete metal roof inspections for homeowners, buyers and insurance requirements: fastener condition, seam integrity, flashing, coating and salt-air corrosion, plus a straight answer on remaining service life with a written report. |
| Gutters for Metal Roofs | From $9/linear ft | Seamless gutter systems sized and mounted correctly for metal roofing: hangers that work with panel profiles and downspouts that carry sudden winter cloudbursts away from stucco walls and foundations, with details that handle coastal grime and debris. |
| Commercial & Agricultural Metal Roofing | Free estimate | Metal roofing for warehouses, workshops, churches, carports and light commercial buildings across Long Beach and the harbor district, with durable coastal-grade panel systems, insulation options and repairs. |
What Affects the Price
- Roof size and pitch : Larger roofs and steeper pitches require more materials and labor, increasing the overall cost.
- Material type and gauge : Premium materials like copper or stone-coated steel cost more than standard corrugated panels, and thicker gauges add durability but raise the price.
- Accessibility and roof complexity : Difficult access, multiple stories, or complex roof shapes with many valleys and penetrations can increase labor time and cost.
- Additional services : Services like gutter installation, snow guards, or flashing repairs add to the total project cost.
What's included
- Travel included across the Long Beach area
- Professional labor & equipment
- Old roofing tear-off & haul-away
- Job site cleanup
- Written estimate before work begins
To get an accurate estimate, have your roof dimensions and material preferences ready, and note any existing damage or leaks. Our estimates include a detailed breakdown of materials, labor, and any additional services, with no hidden fees. Call (562) 685-9725 to schedule your free inspection and receive a written quote.
Pricing FAQ
Why do metal roofing prices vary so much?
Prices vary due to material choice, roof size and complexity, labor rates, and additional services. For example, copper roofing costs more than corrugated panels, and roofs with many penetrations require more labor. We provide itemized estimates so you understand exactly what you are paying for.
Do you offer free estimates?
Yes, we provide free inspections and estimates for all metal roofing projects in Long Beach. Call (562) 685-9725 to schedule an appointment at your convenience.
What payment methods do you accept?
We accept cash, checks, and major credit cards. Financing options are available for larger projects, and we can discuss payment plans during your estimate.