Licensed & Insured, in Long Beach and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in Long Beach
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (562) 685-9725 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in Long Beach and surrounding areas · On-site visits included · Free estimate within 24h
Long Beach Metal Roofing is a team of local certified professionals based in Long Beach. We respond quickly in Long Beach and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (562) 685-9725⭐⭐⭐⭐⭐ 4.9/5 · 238 verified Google reviews
“We needed the roof redone on our warehouse near the port and these guys knocked it out in about a week with a crew of six. Standing seam panels, no leaks even through that windy stretch last month. Office staff actually answered the phone, which is more than I can say for the last company.”
Commercial Metal Roofing
“Got a metal roof retrofit over our old shingles on the front porch area and it turned out way better than I expected. They finished in two days and hauled away every last scrap, my driveway was cleaner than when they started.”
Metal Roof Over Shingles (Retrofit)
“Had them put corrugated metal panels on my wood shed out back. Solid work and the price was fair, though they showed up a couple hours later than scheduled. Roof itself is perfect, so I'd still call them again.”
Corrugated & Ribbed Panel Roofing
“Full metal roof install on our 1,800 square foot house and I honestly can't believe the difference. The crew of four was respectful, kept the yard tidy every evening, and the stone-coated finish looks amazing from the street. Neighbors have already asked for their number.”
Metal Roof Installation
“Had a leak around our roof vent that two other guys couldn't figure out. Long Beach Metal Roofing found it in twenty minutes, replaced the flashing and resealed everything. No drips through the last few rains, huge relief.”
Metal Roof Leak Repair
“They coated and repainted our faded metal roof and it looks brand new, the color match on the trim was spot on. Only reason for four stars is they tracked a little coating dust onto the patio, but they came back and cleaned it without me even pushing.”
Metal Roof Coating & Painting
“Standing seam roof on our place and it's been through two wind storms without a single rattle or lifted panel. The foreman walked me through the whole install and even showed me the screw pattern before they closed it up. Quality outfit.”
Standing Seam Metal Roofing
“Replaced the old metal roof on our canal-front house and the crew handled the tight access like pros. Took about four days, gutters and flashing all redone to match. Grateful they didn't cut corners on the water-side edge, that's where everyone else got lazy.”
Metal Roof ReplacementReal photos of our work in Long Beach · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed fastener panel installation | Starting at $8/sq ft | Includes tear-off, synthetic underlayment, and corrugated or ribbed panels on a simple low-slope roof. |
| Standing seam installation | Starting at $14/sq ft | Concealed fasteners and raised seams, priced higher for coastal salt exposure and complex roof geometry. |
| Stone-coated steel or metal shingle installation | Starting at $12/sq ft | Includes profile-matched panels, underlayment, and flashing rebuilds on steeper historic-district roofs. |
| Retrofit over existing shingles | On estimate | Requires a deck and layer-count inspection before we can confirm code compliance and give a number. |
| Complex or historic-district job | On estimate | Historic overlay review, HOA design approval, and multi-valley geometry need an on-site walk first. |
| Estimate | Free | Response within 24 hours at (562) 685-9725, no obligation to book the job. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Snap-lock standing seam | Starting at $10/sq ft | Includes panels, concealed clips, underlayment, and standard flashing on a simple low-pitch roof. |
| Mechanically seamed standing seam | Starting at $13/sq ft | Includes powered seaming, engineered clip spacing, and trim on steeper or more wind-exposed roofs. |
| Standing seam over existing shingles (retrofit) | Starting at $11/sq ft | Includes subframing and panels over a sound existing roof where code allows, without tear-off. |
| Complex or large-scale job | On estimate | Multiple valleys, dormers, chimneys, or historic district design review require an on-site look before pricing. |
| Travel | Included | In Long Beach and surrounding cities, no separate call-out or mileage fee is added. |
| Estimate | Free | On-site inspection and written scope within 24 hours at (562) 685-9725, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standing seam replacement, full tear-off | Starting at $14/sq ft | Includes tear-off, deck inspection, underlayment and concealed-fastener panels; pitch and penetrations raise the rate. |
| Metal shingle or stone-coated steel replacement | Starting at $12/sq ft | Includes tear-off and new underlayment; roof complexity and historic profile choice affect the final price. |
| Exposed-fastener panel replacement | Starting at $9/sq ft | Includes tear-off, new underlayment and screwed panels; deck repairs or steep pitch add to the cost. |
| Complex or large-scale job | On estimate | Multiple roofs, steep gables, historic review or heavy deck repair need an on-site look before we quote. |
| Travel | Included | In Long Beach and surrounding areas, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (562) 685-9725, with no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener retrofit over shingles | Starting at $7/sq ft | Includes separation layer, ribbed panels and new screws; layer count and roof pitch move the price. |
| Standing seam retrofit over shingles | Starting at $12/sq ft | Concealed-fastener panels and trim; panel gauge and roof complexity drive the final number. |
| Stone-coated steel retrofit | Starting at $11/sq ft | Textured steel tiles over existing shingles; tile profile and color selection affect cost. |
| Complex or large-scale retrofit | On estimate | Multiple chimneys, skylights, tight Belmont Shore lots or historic review need an on-site look first. |
| Travel | Included | in Long Beach and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (562) 685-9725, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Minor repair (fasteners, sealant, small flashing) | Starting at $450 | Covers a small panel fix, a handful of gasketed screws, or one penetration reseal. |
| Panel replacement (single panel) | Starting at $650 | Includes matching panel, removal of damaged panel, and re-sealing seams and edges. |
| Flashing rebuild (chimney or skylight) | Starting at $850 | New formed metal flashing, sealant, and water test at the penetration. |
| Multiple repairs or large section | On estimate | Scope depends on roof pitch, access, panel profile, and how much deck is exposed. |
| Travel | Included | In Long Beach and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (562) 685-9725, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single-point leak repair | Starting at $450 | Includes diagnostic walk, water test where needed, and one straightforward fix like a boot or screw cluster |
| Multi-point or flashing repair | Starting at $750 | Covers several leak points or a flashing rebuild at a wall, curb or chimney transition |
| Emergency tarping and stabilization | Starting at $350 | Temporary protection during active winter rain, credited toward the permanent repair when booked |
| Complex or large-scale leak repair | On estimate | Needs an on-site look when leaks span multiple roof sections or involve panel replacement |
| Travel | Included | In Long Beach and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (562) 685-9725, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Targeted screw replacement (single slope or section) | Starting at $750 | Includes crew, oversized corrosion-resistant screws, new UV washers and a water test on the repaired area. |
| Washer refresh on sun-facing slopes | Starting at $1,100 | Replaces dried neoprene washers on sound screws, priced by roof square footage and slope access. |
| Full fastener-line replacement | Starting at $2,400 | Replaces every screw on a slope or whole roof when corrosion is widespread, priced by fastener count and pitch. |
| Two-story or steep-pitch home | On estimate | Needs safety rigging, longer setup and more labor time, so we look at the roof before quoting. |
| Hidden purlin or sheathing repair | On estimate | Priced after we open the section, since rotted framing under a leaking screw changes the scope. |
| Estimate and travel | Free | Free on-site estimate in Long Beach, response within 24 hours at (562) 685-9725, no obligation. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Corrugated panel roof (garage or shed) | Starting at $5.50/sq ft | 29-gauge coated panels, underlayment, closures and fasteners included; deck condition and access move the price |
| Ribbed R-panel roof (workshop or light commercial) | Starting at $6.75/sq ft | 26-gauge panels with longer spans and cleaner lines; height, penetrations and removal add cost |
| 5V crimp panel roof | Starting at $7.25/sq ft | Traditional V-rib profile with strong side laps; pitch and trim work affect the final number |
| Re-fastening and panel repair | On estimate | Failed screws, washers and closures replaced on sound panels; leak location and panel count set the scope |
| Travel | Included | in Long Beach and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (562) 685-9725, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Metal shingle repair (minor) | Starting at $450 | Covers replacing a few damaged shingles and resealing penetrations, with price rising for steep access or hidden damage. |
| Metal shingle repair (wind or branch damage) | Starting at $1,200 | Includes matching replacement shingles, re-fastening, and flashing checks, with cost driven by shingle profile availability and roof height. |
| Full metal shingle roof replacement | From $9/sq ft | Includes tear-off, underlayment, flashing, and shingles, with price rising for steep pitch, complex valleys, and premium stone-coated profiles. |
| Retrofit over existing shingles | From $8/sq ft | Includes prep, underlayment, and metal shingles over an approved existing layer, with cost depending on deck condition and local code limits. |
| Complex or large-scale project | On estimate | Multi-plane roofs, historic homes, and commercial buildings need an on-site walk before we give a number. |
| Estimate | Free | Response within 24 hours at (562) 685-9725, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stone-coated steel roof installation (standard profile) | Starting at $9/sq ft | Includes tear-off, underlayment, panels, flashing and cleanup on a typical accessible Long Beach roof. |
| Barrel tile or shake profile upgrade | Starting at $11/sq ft | Higher material and labor cost for textured profiles on steeper gables and detailed historic homes. |
| Metal roof over shingles retrofit | Starting at $8/sq ft | Recover over sound existing shingles where code allows, saving tear-off and disposal cost. |
| Complex or large-scale job | On estimate | Multiple valleys, steep pitch, chimney and skylight flashing, or historic district review need an on-site look. |
| Travel | Included | In Long Beach and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (562) 685-9725, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Copper flashing and accent work | Starting at $20/sq ft | Includes custom-fabricated copper pans, valleys and counterflashings; complexity and access move the price |
| Full copper architectural roof | Starting at $28/sq ft | Includes soldered or seamed copper panels; roof pitch, valleys and deck condition drive the number |
| Zinc or aluminum specialty roof | Starting at $22/sq ft | Includes standing seam or flat-lock panels; metal choice and panel layout affect the rate |
| Metal shingle or stone-coated steel | Starting at $18/sq ft | Includes panels, underlayment and trim; roof complexity and tear-off add to the cost |
| Complex or historic home project | On estimate | Historic review, steep gables and multiple penetrations need an on-site look before a number |
| Estimate | Free | Response within 24 hours at (562) 685-9725, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Basic prep and reflective coat | Starting at $2.50/sq ft | Pressure wash, spot prime, and one reflective topcoat on an accessible sound roof. |
| Rust treatment and full system | Starting at $3.75/sq ft | Rust converter, primer, and two-coat system where fastener heads and laps have failed. |
| Steep or complex roof | On estimate | Pitch, skylights, and multiple penetrations raise labor, so we price after an on-site look. |
| Travel | Included | Covered in Long Beach and surrounding cities, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (562) 685-9725, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Chimney counterflashing reset | Starting at $600 | Includes removal of failed flashing, new bent metal and sealing at the masonry joint, priced by chimney height and access. |
| Skylight curb repair | Starting at $850 | Covers new curb pan and cap fabrication for a standard skylight, with cost rising for oversize units or steep roof pitch. |
| Valley or stucco transition flashing | Starting at $700 | Includes cutting out rusted metal and installing new formed flashing, with cost driven by roof pitch and amount of surrounding roofing disturbed. |
| Parapet wall and coping repair | On estimate | Requires an on-site look because wall length, height, coping profile and through-wall flashing scope vary widely from roof to roof. |
| Travel | Included | in Long Beach and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (562) 685-9725, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Cool-roof coating package | Starting at $1,200 | Includes surface prep and reflective coating on a single-story low-pitch roof, priced by square footage and access. |
| Edge and ridge fastening upgrade | Starting at $1,450 | Replaces perimeter and ridge fasteners for wind uplift, with cost driven by roof height and panel type. |
| Combined protection package | Starting at $2,200 | Bundles coating and fastening work on larger or two-story roofs, with pricing set after an on-site measurement. |
| Complex or large-scale job | On estimate | Steep gables, multiple roof planes, or historic district constraints need an on-site look before we quote. |
| Travel | Included | in Long Beach and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (562) 685-9725, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Roof inspection and damage assessment | Free | Full roof walk, fastener check, photo documentation, and a written repair versus replacement recommendation |
| Fastener replacement and re-torque | Starting at $450 | Covers pulling corroded screws, new washers, and correct torque; price rises with roof size and access |
| Panel and flashing repair | Starting at $850 | Includes matching panel replacement and flashing rebuild; steep gables and historic profiles move the number up |
| Storm damage across multiple slopes | On estimate | Widespread damage needs an on-site look at deck condition and underlayment before we quote |
| Travel | Included | in Long Beach and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (562) 685-9725, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Basic visual inspection | Free estimate | Walk-over inspection with photo notes on fasteners, seams, and flashing condition, no written report. |
| Written report inspection | Starting at $250 | Full inspection with written report, photo package, and remaining service life estimate for the roof. |
| Pre-purchase or insurance inspection | Starting at $350 | Detailed documentation formatted for real estate transactions or insurance claim review, includes repair cost ranges. |
| Leak-tracing inspection | On estimate | Targeted inspection to find an active leak source, scoped after a phone consultation about the symptoms. |
| Travel | Included | in Long Beach and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (562) 685-9725, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standard seamless aluminum gutter run | Starting at $9/linear ft | Includes seamless forming, fascia-mount hangers, and standard downspouts on single-story runs. |
| Oversized 6-inch seamless with leaf guards | Starting at $16/linear ft | Includes debris screens and larger trough for heavy palm, ficus, or jacaranda litter loads. |
| Seam-clamp hanger system for standing seam | Starting at $14/linear ft | Includes non-piercing seam clamps that protect the panel warranty on standing seam roofs. |
| Multi-story or steep-gable installation | On estimate | Needs an on-site look for access, lift rental, and safe hanger placement on steep planes. |
| Travel | Included | In Long Beach and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (562) 685-9725, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Commercial roof inspection and estimate | Free | On-site walk-through, photos of deficiencies, and a written scope with no obligation. |
| Repair and re-fastening | Starting at $650 | Screw replacement, flashing re-seal, and re-torque; price rises with roof size and access. |
| New exposed-fastener panel roof | Starting at $9.50 per sq ft | Coastal-grade ribbed panels and fasteners installed; insulation and tear-off move the number. |
| Standing seam commercial roof | On estimate | Concealed-fastener system priced after we measure the roof and confirm access and pitch. |
| Travel | Included | In Long Beach and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (562) 685-9725, no obligation to book the work. |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
Homeowners searching for a metal roofing contractor near me in Long Beach need a crew that understands the local housing stock, not a call center dispatching trucks from three counties away. Long Beach Metal Roofing is built for exactly that: a network of licensed, insured local contractors who install, replace, re-roof, and repair metal systems on the Craftsman bungalows, Spanish Colonial Revival homes, mid-century stucco ranches, and newer townhomes that define this city. We work on steep gables in California Heights and Bixby Knolls, low-slope ranches across Lakewood Village and Los Altos, and waterfront cottages from Naples to Belmont Shore, where salt air and strong UV age every fastener and finish.
From Signal Hill to Lakewood, Bellflower, and Paramount, we see the same pattern again and again: a large stock of aging exposed-fastener roofs whose sealing washers are drying out, and older tile or shingle roofs that are ready for a metal retrofit. Whether you need a full Metal Roof Installation or a targeted repair, we start with a straight assessment of what you actually have. Call (562) 685-9725 to schedule a free roof inspection and get honest guidance before you spend a dime.
Most metal roof leaks in Long Beach trace back to a handful of predictable failure points. On 15 to 30 year old exposed-fastener roofs, the number one cause is fasteners backing out as their EPDM sealing washers dry, shrink, and crack under years of UV and salt-laden ocean air. Once that seal fails, water slips past the screw head and travels along the purlins and decking, often showing up as a ceiling stain far from the actual entry point. Seam separation from thermal movement, failed pipe boots, and flashing gaps at chimneys, skylights, and valleys are the next most common culprits. Wind-lifted panels after a Santa Ana event or an atmospheric-river storm, and punctures from fallen ficus or palm limbs, round out the list.
Ignoring a small leak is expensive. Water tracking along purlins can rot sheathing and decking, soak insulation, and turn a simple Metal Roof Leak Repair into a decking replacement. That is why we diagnose first and quote second. On many aging screw-down roofs, a full Screw Replacement & Re-Fastening with new sealing washers restores a watertight roof for a fraction of replacement cost. When the panels themselves are sound and only the fasteners and flashing have failed, we will tell you plainly that repair is the right call. When seams are separating across the whole field or the deck is soft, we will tell you that too.
If you have an active leak, do not wait for the next rain event to find the weak flashing. Call (562) 685-9725 or contact us for a prompt inspection. We document what we find, explain the repair-versus-replace decision in plain English, and give you a written scope before any work begins.
We install the full range of metal systems, and we match the system to the home rather than pushing one product. Standing Seam Metal Roofing is the premium choice: concealed clips, no exposed fasteners, clean vertical lines, and excellent performance in salt air and strong UV. Corrugated & Ribbed Panel Roofing is the economical workhorse for cabins, barns, workshops, and budget-conscious re-roofs. We also install Metal Shingle Roofing and Stone-Coated Steel Roofing where a traditional look matters, and Copper & Specialty Metal Roofing for accents, bay windows, and entry roofs.
The honest comparison is simple: standing seam costs more up front and has no exposed screws to maintain, while screw-down costs less and needs its fasteners serviced over its life. On the installation side, Metal Roof Over Shingles (Retrofit) is a legitimate option when the existing deck is sound and local code allows the existing layers, and a full Metal Roof Replacement with tear-off is the right call when the deck is not.
Metal roof projects are typically quoted per square foot for installations, while repairs are often flat-rate. Your price depends on the panel system and metal gauge, roof pitch and complexity, tear-off versus recover, decking condition, and access. We frame every figure as a typical range because final pricing depends on the roof and site conditions, and we put the scope in writing before work starts. Some carriers may offer premium discounts for metal or impact-rated roofs, but that is between you and your insurer.
For a realistic ballpark before you commit, see our pricing page, then request a free estimate or free roof inspection. We will tell you plainly whether a repair, a coating, or a full replacement is the better spend for your home.
After a storm, we inspect the roof and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent, coverage decisions rest with your carrier, and we make no promise that a claim will be approved. On permits, in most jurisdictions a permit is commonly required for a full replacement or re-roof, but requirements vary by city, and thresholds, fees, and inspection requirements are set locally. Historic district or HOA design review can also affect panel profile and color choices. Requirements vary, always verify with the Long Beach building or planning department before starting your project.
If you are unsure what your roof needs or what your city requires, contact us for a free inspection and a clear, written scope. We will point you to the right local authority and help you understand the process without pressure.
Ready to get started? Long Beach Metal Roofing serves in Long Beach and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in Long Beach · Response within 24h · No commitment · ☎ (562) 685-9725
Your Free Quote Request