Serving the Long Beach area  ·  (562) 685-9725  ·  Open Mon-Sun 7am-7pm
📞 (562) 685-9725 Free Quote

Metal Roofing in Seal Beach, CA (90740) · Local Professionals

Long Beach Metal Roofing · Fast response in Seal Beach and the Long Beach area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
🎯 Get a Free Quote 📞 (562) 685-9725
+238Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Seal Beach is a small beach town where salt air is a daily fact of life, and it eats at roofing fasteners faster than almost anywhere else in the region. The mix of 1920s beach cottages, mid-century ranch homes, and the dense Leisure World community means roofs here face constant marine exposure, strong UV, and the occasional Santa Ana wind that rattles older panels and shingles.

Homeowners in 90740 call Long Beach Metal Roofing because we understand the local failure points: rusted screws, corroded flashing, and seams that separate after a few seasons of salt and sun. Whether you are near the Seal Beach Pier or tucked into the Hilltop neighborhood, we bring insured crews and metal roofing expertise that holds up to the coastal environment.

Metal Roofing in Seal Beach (90740)

Seal Beach properties sit on a flat coastal plain with a high water table in some areas, and the constant salt air means that standard fasteners and low-grade metals fail prematurely. Beach cottages often have tight lots with limited access, and many homes in Leisure World are in HOA-governed communities with specific design guidelines. Older homes near the pier may have multiple roof layers, which affects whether a retrofit over shingles is allowed. We assess each roof for corrosion, fastener condition, and flashing integrity, and we recommend metal systems that resist salt spray, such as copper, standing seam with marine-grade coatings, and stone-coated steel.

Our team has worked throughout Long Beach and the surrounding areas, including Seal Beach, and we know the local building department’s requirements and the common issues that come up during inspections.

Our services in Seal Beach

How a Job Works in Seal Beach

Step 1: Call us at (562) 685-9725 or request a free estimate online. We schedule an on-site assessment at your Seal Beach property, inspect the roof, check for leaks and corrosion, and discuss your options and budget. We also review any HOA or city requirements that may apply.

Step 2: Once you approve the scope, we pull the necessary permits through the City of Seal Beach and schedule the work. Our crews are experienced with tight lot access and coastal installations, and we take care to protect your landscaping and neighboring properties. For HOA communities, we coordinate with your board to ensure compliance.

Step 3: After installation, we clean the site thoroughly, walk you through the finished roof, and provide documentation for your records. We leave your property clean and your roof ready for the coastal weather.

Metal roofing costs in Seal Beach vary by material and complexity. As a ballpark, corrugated panel roofing starts around $5.50 per square foot, standing seam from $10, and copper or specialty metals from $20. Repairs like leak fixes start at $450, and screw replacement from $750. Factors that affect price include roof size, access, the number of layers to remove, and the condition of the existing structure. We provide free, no-obligation estimates so you know exactly what to expect. Call (562) 685-9725 to schedule yours.

My beach cottage near the Seal Beach Pier has rusted screws and some loose panels. Can you fix that without a full replacement?
Yes, we specialize in screw replacement and re-fastening for coastal homes. We replace corroded fasteners with marine-grade screws and resecure panels to extend the life of your roof. If corrosion is widespread, we will let you know whether a repair or replacement makes more sense.
A storm just blew some panels loose on my roof in Seal Beach. How quickly can you respond?
We offer free inspections for storm and wind damage and prioritize emergency repairs. Call us at (562) 685-9725, and we will schedule a prompt assessment to secure your roof and prevent further damage.
What does a typical metal roof replacement cost in Seal Beach?
Most replacements range from $9 to $20 per square foot depending on material, roof complexity, and whether we remove the old roof. We provide a detailed, free estimate after inspecting your property so you can plan accordingly.
Do I need a permit for a metal roof in Seal Beach, and how do I find out about local rules?
Yes, roofing permits are typically required for replacements and some repairs. Requirements vary, so we recommend checking with the City of Seal Beach website or contacting the building department directly. We handle the permit process for you as part of the job.
My HOA in Leisure World has design rules for roofing. Can you help with approval?
We are familiar with HOA requirements in Seal Beach and can provide material samples and documentation to help you get approval. We also ensure our installation meets any property line setbacks and community guidelines.
Are you insured for work on my Seal Beach property?
Yes, we are fully insured with general liability and workers' compensation coverage.
How often should I have my metal roof inspected in Seal Beach given the salt air?
We recommend an annual inspection, especially after winter rains and Santa Ana wind events. Salt air accelerates corrosion, so checking fasteners and flashing yearly can prevent leaks and extend your roof's lifespan. We offer free estimates for inspections.

Nearby service areas

📍 Long Beach 90804📍 Signal Hill 90755📍 Lakewood 90713📍 Bellflower 90706
Why choose us?

Trusted professionals in Long Beach

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Long Beach

All your work handled by qualified professionals in Long Beach

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

238+ Verified Client Reviews in Long Beach

⭐⭐⭐⭐⭐ 4.9/5 · 238 verified Google reviews

Karen T.
⭐⭐⭐⭐⭐
KT
Karen T.
Long Beach

“We needed the roof redone on our warehouse near the port and these guys knocked it out in about a week with a crew of six. Standing seam panels, no leaks even through that windy stretch last month. Office staff actually answered the phone, which is more than I can say for the last company.”

Commercial Metal Roofing
Tom D.
⭐⭐⭐⭐⭐
TD
Tom D.
Signal Hill

“Got a metal roof retrofit over our old shingles on the front porch area and it turned out way better than I expected. They finished in two days and hauled away every last scrap, my driveway was cleaner than when they started.”

Metal Roof Over Shingles (Retrofit)
Emily C.
⭐⭐⭐⭐
EC
Emily C.
Lakewood

“Had them put corrugated metal panels on my wood shed out back. Solid work and the price was fair, though they showed up a couple hours later than scheduled. Roof itself is perfect, so I'd still call them again.”

Corrugated & Ribbed Panel Roofing
Scott H.
⭐⭐⭐⭐⭐
SH
Scott H.
Bellflower

“Full metal roof install on our 1,800 square foot house and I honestly can't believe the difference. The crew of four was respectful, kept the yard tidy every evening, and the stone-coated finish looks amazing from the street. Neighbors have already asked for their number.”

Metal Roof Installation
Lisa H.
⭐⭐⭐⭐⭐
LH
Lisa H.
Paramount

“Had a leak around our roof vent that two other guys couldn't figure out. Long Beach Metal Roofing found it in twenty minutes, replaced the flashing and resealed everything. No drips through the last few rains, huge relief.”

Metal Roof Leak Repair
James P.
⭐⭐⭐⭐
JP
James P.
Compton

“They coated and repainted our faded metal roof and it looks brand new, the color match on the trim was spot on. Only reason for four stars is they tracked a little coating dust onto the patio, but they came back and cleaned it without me even pushing.”

Metal Roof Coating & Painting
Amanda K.
⭐⭐⭐⭐⭐
AK
Amanda K.
Carson

“Standing seam roof on our place and it's been through two wind storms without a single rattle or lifted panel. The foreman walked me through the whole install and even showed me the screw pattern before they closed it up. Quality outfit.”

Standing Seam Metal Roofing
Robert M.
⭐⭐⭐⭐⭐
RM
Robert M.
Torrance

“Replaced the old metal roof on our canal-front house and the crew handled the tight access like pros. Took about four days, gutters and flashing all redone to match. Grateful they didn't cut corners on the water-side edge, that's where everyone else got lazy.”

Metal Roof Replacement
Free Quote

Get Your Free Quote

Metal Roofing in Long Beach · Response within 24h · No commitment · ☎ (562) 685-9725

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Long Beach ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm