Serving the Long Beach area  ·  (562) 685-9725  ·  Open Mon-Sun 7am-7pm
📞 (562) 685-9725 Free Quote

Metal Roofing in Los Alamitos, CA (90720) · Local Professionals

Long Beach Metal Roofing · Fast response in Los Alamitos and the Long Beach area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+238Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Los Alamitos is a small, tidy city where ranch homes on generous lots sit just inland from the coast, and the salt air still finds its way to every roof. The housing stock here is mostly 1950s and 1960s stucco ranches with low-pitched composition shingle roofs, plus a growing number of newer two-story homes and townhomes near the Los Alamitos Race Course and the Joint Forces Training Base. Lots are wide but often shallow, with mature trees and narrow side yards that make roof access and material staging a puzzle.

Homeowners in 90720 call Long Beach Metal Roofing because we understand the local mix: the sun bakes south-facing slopes, the marine layer keeps things damp many mornings, and Santa Ana winds rattle older fasteners. We are based in Long Beach, just a short drive down Katella or Los Alamitos Boulevard, and we have worked on roofs throughout the area, from the streets near Laurel Park to the quiet cul-de-sacs off Bloomfield.

Metal Roofing in Los Alamitos (90720)

Los Alamitos sits on flat ground with a high water table in some spots, so drainage matters. Many of these ranch homes have low-slope roofs that were originally built for composition shingles, and when we install metal, we pay close attention to attic ventilation and flashing details at the eaves. The wide lots often mean mature ficus and pine trees drop debris that clogs gutters and traps moisture against fasteners. We also see a lot of add-on patio covers and room extensions with questionable flashing, which are common leak points. Our team is experienced with retrofit over existing shingles (up to two layers, depending on code) and with standing seam and stone-coated steel that reflect heat and stand up to salt air.

We have been serving Los Alamitos and the surrounding Long Beach area for years, and we know the local building department's permit process and inspection timelines. Whether your home is a classic ranch near Rossmoor or a newer build off Cerritos Avenue, we can recommend the right metal system for your roof pitch, budget, and style.

Our services in Los Alamitos

How a Job Works in Los Alamitos

Step 1: Call us at (562) 685-9725 or request a free estimate online. We will schedule an on-site assessment at your convenience, usually within a day or two. We inspect your roof, attic, and gutters, take measurements, and discuss your options. You get a written estimate with no pressure.

Step 2: Once you approve, we pull the required permits from the City of Los Alamitos (or Orange County if you are in an unincorporated pocket). We coordinate material delivery and staging, which can be tight on narrow streets near the base. Our crews are fully insured and trained on metal roofing systems. We protect your landscaping and keep the job site tidy each day.

Step 3: After installation, we do a thorough cleanup, including magnetic sweeps for nails, and walk the roof with you to show you the finished work. We also provide care tips and a warranty packet. We leave your property clean and your roof ready for the next rainy season.

Metal roofing in Los Alamitos is priced by the square foot, and most jobs fall into a few common ranges. A basic corrugated or ribbed panel roof starts around $5.50 per square foot, while standing seam runs from $10 per square foot. A full replacement with metal shingles or stone-coated steel typically starts at $9 per square foot. If you are retrofitting over existing shingles, that starts at $7 per square foot. Repairs, including leak fixes and flashing work, start at $450. The final cost depends on roof size, pitch, access, the condition of your existing roof, and whether any structural repairs are needed. We give free estimates and explain all costs upfront. Call (562) 685-9725 to schedule yours.

My 1950s ranch near Laurel Park has a low-pitch roof. Can you install metal over the existing shingles?
Yes, in many cases we can. Los Alamitos code allows a retrofit over up to two layers of existing shingles, provided the roof deck is sound and the pitch meets the minimum for the metal product. We will inspect your roof and let you know if a tear-off is required. Low-pitch roofs often need a mechanically seamed or standing seam panel to prevent leaks.
A storm just blew some panels loose on my roof near the Joint Forces Training Base. How fast can you respond?
We offer emergency storm and wind damage repair and free inspections. Call (562) 685-9725 and we will schedule a visit as soon as possible, often the same day or next. We can secure loose panels, tarp leaks, and provide documentation for your insurance claim.
What is the typical cost for a metal roof on a 1,500-square-foot ranch home in Los Alamitos?
For a 1,500-square-foot home with a simple gable roof, a basic corrugated panel system might start around $8,000 to $12,000, while standing seam could range from $15,000 to $20,000. These are ballpark figures. The exact price depends on roof complexity, pitch, and whether you need a tear-off or retrofit. We provide a free written estimate after inspecting your roof.
Do I need a permit from the City of Los Alamitos for a metal roof installation?
Yes, a roofing permit is typically required for a full replacement or re-roof, and sometimes for repairs over a certain size. The City of Los Alamitos Building Department reviews plans and inspects the work. We handle the permit application and inspections for you. Requirements can vary, so we always confirm with the city before starting.
My HOA requires approval for roof color. Can you help with that process?
Yes. Many HOAs in Los Alamitos have design review requirements for roof color and profile. We can provide product samples, manufacturer specifications, and a description of the work to submit to your HOA. We will coordinate with your board to make sure the installation meets their guidelines. If your neighbor's property line is close, we also respect setbacks and drainage patterns.
Are you fully insured for work on my Los Alamitos home?
Yes, we carry general liability insurance and workers' compensation coverage. This protects you and your property in case of an accident.
How often should I have my metal roof inspected in Los Alamitos?
We recommend an annual inspection, ideally in late summer or early fall before the rainy season. Check for loose fasteners, debris in gutters, and any signs of flashing wear, especially after Santa Ana winds. If you have trees near the roof, inspect twice a year. We offer free estimates for inspections and can set up a maintenance plan.
Why choose us?

Trusted professionals in Long Beach

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Long Beach

All your work handled by qualified professionals in Long Beach

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

238+ Verified Client Reviews in Long Beach

⭐⭐⭐⭐⭐ 4.9/5 · 238 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Long Beach · Response within 24h · No commitment · ☎ (562) 685-9725

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Long Beach ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm