Serving the Long Beach area  ·  (562) 685-9725  ·  Open Mon-Sun 7am-7pm
📞 (562) 685-9725 Free Quote

Metal Roofing in Cypress, CA (90630) · Local Professionals

Long Beach Metal Roofing · Fast response in Cypress and the Long Beach area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+238Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Cypress is a city of 1970s and 80s stucco homes and business parks, where decades of strong sun have baked the original shingle roofs into brittle, curling messes. If you live near Cypress College or along Valley View Street, you have probably noticed neighbors upgrading to metal, and for good reason.

Homeowners in 90630 call Long Beach Metal Roofing because we understand the specific wear that Cypress roofs endure: relentless UV, dry Santa Ana winds that rattle old fasteners, and the occasional heavy rain that finds every weak flashing. We are based in Long Beach, just a short drive down the 605 or 405, and we know the local housing stock inside and out.

Metal Roofing in Cypress (90630)

Cypress sits on the flat coastal plain, and most of its residential streets are lined with tract homes built between 1970 and 1985. These houses typically have low-pitched roofs with composition shingles that are now 30 to 50 years old. The stucco walls and tight lots mean access can be tricky, especially in the older tracts near Oxford Academy and the civic center. We regularly work around narrow driveways, mature trees, and the occasional HOA requirement. The soil is sandy and drains well, but that also means proper flashing and fastening are critical to prevent wind uplift during Santa Ana events.

Our team has been serving Cypress and the surrounding Long Beach area for years, handling everything from small leak repairs to full metal roof replacements. We know which neighborhoods have particular challenges, like the commercial buildings along Katella Avenue that need durable, low-maintenance roofing, or the homes near Larwin Park where original shingles are failing.

Our services in Cypress

How a Job Works in Cypress

Step 1: You call us at (562) 685-9725 or request a free estimate online. We schedule an on-site assessment at your Cypress property, usually within a couple of days. We inspect your current roof, take measurements, and discuss your options, whether that is a repair, a replacement, or a retrofit over existing shingles. We also check for any permit requirements with the city of Cypress.

Step 2: Once you approve the estimate, we pull the necessary permits and schedule the work. For most Cypress homes, a full replacement takes two to four days, depending on the size and complexity. We protect your landscaping and coordinate with any HOA if needed. Our crews are insured and trained to handle the tight access common in Cypress neighborhoods, and we keep the job site organized.

Step 3: After installation, we do a thorough cleanup, including magnetic sweeps for nails and debris. We walk the roof with you to show you the completed work and answer any questions. We do not consider the job done until you are satisfied and your property is clean.

Pricing for metal roofing in Cypress depends on the material, roof size, and complexity. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and a retrofit over existing shingles at $7. For repairs, minor leak fixes start at $450, and screw replacement or re-fastening starts at $750. Commercial and agricultural metal roofing is quoted per project. Factors like roof pitch, number of penetrations, and accessibility can affect the final cost. We provide free, no-obligation estimates so you know exactly what to expect. Call (562) 685-9725 to schedule yours.

My Cypress home was built in the 1970s and still has the original shingles. Can you install metal roofing over them?
Yes, in many cases we can install a metal roof over your existing shingles, provided the roof structure is sound and the existing layers meet code limits. This retrofit can save you money on tear-off and disposal. We will inspect your roof and let you know if it is a good candidate.
A windstorm just lifted some shingles on my roof near Cypress High School. How quickly can you respond?
We offer emergency storm and wind damage repair and can usually get to you within 24 to 48 hours after a major event. Call us at (562) 685-9725 to schedule an inspection. We will tarp any active leaks and provide a detailed repair estimate.
What does a typical metal roof replacement cost for a 1,500-square-foot home in 90630?
For a standard 1,500-square-foot home, a metal roof replacement typically ranges from $12,000 to $18,000, depending on the material and roof complexity. Standing seam or stone-coated steel will be at the higher end. We provide a free estimate to give you an exact price.
Do I need a permit from the city of Cypress for a metal roof installation?
Yes, a permit is generally required for a full roof replacement or re-roof. The city of Cypress Building Department can provide specific requirements and fees. We handle the permit application process for you and ensure all work meets local codes.
My HOA requires approval for exterior changes. Can you help with the paperwork for a metal roof?
We can provide product specifications, color samples, and installation details to submit to your HOA. While we cannot guarantee approval, we will work with you to ensure the proposed roof meets the HOA design guidelines. We recommend getting approval before scheduling the work.
Are you fully insured for roofing work in Cypress?
Yes, we carry general liability insurance and workers' compensation coverage. We are happy to provide certificates of insurance upon request so you can verify our coverage before any work begins.
What maintenance does a metal roof need in Cypress's climate?
Metal roofs are low maintenance, but we recommend an annual inspection to check fasteners and flashing, especially after Santa Ana wind events. Cleaning gutters and removing debris from valleys will help prevent water pooling. We offer maintenance plans and inspections to keep your roof in top shape.
Why choose us?

Trusted professionals in Long Beach

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Long Beach

All your work handled by qualified professionals in Long Beach

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

238+ Verified Client Reviews in Long Beach

⭐⭐⭐⭐⭐ 4.9/5 · 238 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Long Beach · Response within 24h · No commitment · ☎ (562) 685-9725

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Long Beach ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm