Serving the Long Beach area  ·  (562) 685-9725  ·  Open Mon-Sun 7am-7pm
📞 (562) 685-9725 Free Quote

Metal Roofing in Signal Hill, CA (90755) · Local Professionals

Long Beach Metal Roofing · Fast response in Signal Hill and the Long Beach area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+238Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Signal Hill is its own little city on the hill, with hillside homes that catch the ocean wind and sun in a way the flat streets below never do. Many of these houses date back to the 1920s and 1930s, with steep gables and older shingle roofs that have taken decades of salt air and UV. The views from Raymond Avenue and Skyline Drive are worth protecting, and so is the roof over your head.

We are Long Beach Metal Roofing, and we work Signal Hill (90755) every week. From the tight streets near Hill Street to the slopes above the Long Beach border, we know how wind funnels through these canyons and how fast a loose fastener turns into a leak. When your roof needs attention, call us at (562) 685-9725 for a free estimate.

Metal Roofing in Signal Hill (90755)

Signal Hill sits on a raised oil field, and the terrain changes fast. One block can be flat, the next slopes steeply toward Long Beach. Lots are often narrow with limited driveway access, and many homes are built close to the property line. That means our crews plan carefully for staging and safety, especially on hillside streets where a dumpster or material delivery can block a lane. The wind here is constant, and it hits older shingle roofs hard, lifting tabs and stressing fasteners. We see a lot of wind damage after Santa Ana events, and the marine layer keeps things damp enough that flashing failures show up as leaks. Our metal roof replacement and storm and wind damage repair services are built for these conditions. We are fully insured with general liability and workers' compensation, so you are covered if anything happens on your property.

Our team has worked on Signal Hill homes for years, from small bungalows near the library to larger hillside houses with views of the harbor. We know the local building department and what they look for, and we can help you choose a panel profile and color that fits your block.

Our services in Signal Hill

How a Job Works in Signal Hill

Step 1: You call us at (562) 685-9725 or request a free estimate online. We schedule a time to come out and inspect your roof, whether it is a small repair or a full replacement. We look at the deck, the flashing, the fasteners, and how the roof drains. Then we give you a written estimate with options and no pressure.

Step 2: Once you approve, we pull the permits. In Signal Hill, roofing permits are required for replacements, and the city inspects the work. We handle the paperwork and schedule the inspection. If your home is in an HOA or a historic overlay, we help you get the design approval before we order materials. On tight hillside lots, we plan deliveries and staging so we do not block your neighbors.

Step 3: When the work is done, we clean up every day and do a final walkthrough with you. We make sure the site is clear, the gutters are clean, and you know how to care for your new roof. We do not leave until you are satisfied.

Pricing for metal roofing in Signal Hill depends on the size and pitch of your roof, the condition of the deck, access, and the material you choose. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and a retrofit over existing shingles at $7. Repairs start at $450, and screw replacement or re-fastening starts at $750. Coating and painting start at $2.50 per square foot. These are starting prices, not final quotes. We give you a firm estimate after we see your roof. Call (562) 685-9725 for a free estimate.

My house is on a steep street near Raymond Avenue, and the roof is original 1930s shingle. Can you replace it with metal?
Yes. We work on steep slopes regularly in Signal Hill. We will inspect the deck and framing first, because older homes sometimes need repairs before a new roof goes on. We can install standing seam or metal shingle that handles the wind and looks right for the neighborhood.
A storm just blew some panels loose on my roof. How fast can you get out to Signal Hill?
We prioritize storm and wind damage calls. Call us at (562) 685-9725, and we will schedule an inspection as soon as possible, often the same day or next. We can tarp or secure the area to prevent further damage and give you a repair estimate.
What does a typical metal roof replacement cost for a 1,500 square foot house in Signal Hill?
For a house that size, a basic metal roof replacement might start around $13,500 to $18,000, depending on the material, pitch, and deck condition. Standing seam or specialty metals will be higher. We provide a detailed estimate after a free inspection.
Do I need a permit to replace my roof in Signal Hill, and how do I get one?
Yes, a roofing permit is typically required for a full replacement in Signal Hill. The rules and fees are set by the city, so check with the City of Signal Hill website or call the building department to confirm current requirements. We handle the permit application and inspection scheduling for you.
My neighbor and I share a property line, and my new roof might overhang slightly. What are the rules?
Property line and overhang rules can be tricky. In California, you generally have the right to maintain your roof, but if a new overhang crosses the line, you may need a neighbor's permission or a survey. We can help you understand the options and coordinate with your neighbor before work starts.
Are you insured for work on my Signal Hill home?
Yes, we are fully insured with general liability and workers' compensation coverage.
What kind of maintenance does a metal roof need in Signal Hill's climate?
Metal roofs are low maintenance, but the salt air and wind mean you should check fasteners and flashing once a year. We recommend a professional inspection after big wind events. Keeping gutters clear and touching up scratches will extend the life of the roof.
Why choose us?

Trusted professionals in Long Beach

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Long Beach

All your work handled by qualified professionals in Long Beach

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

238+ Verified Client Reviews in Long Beach

⭐⭐⭐⭐⭐ 4.9/5 · 238 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Long Beach · Response within 24h · No commitment · ☎ (562) 685-9725

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Long Beach ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm