Serving the Long Beach area  ·  (562) 685-9725  ·  Open Mon-Sun 7am-7pm
📞 (562) 685-9725 Free Quote

Metal Roofing in Compton, CA (90220) · Local Professionals

Long Beach Metal Roofing · Fast response in Compton and the Long Beach area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+238Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Compton is a city of long, flat blocks and post-war ranch houses, where the summer sun hits low-pitched composition roofs hard and the winter rains find every gap. Most of the housing stock here went up between the 1940s and 1960s, and those roofs are now well past their expected service life. We know the streets around Compton College, the older homes near the Compton Creek, and the commercial strips along Alondra Boulevard and Rosecrans Avenue.

Homeowners in 90220 call Long Beach Metal Roofing because we understand the specific wear patterns of this area: sun-baked shingles, heat-driven attic temperatures, and wind that rattles old fasteners loose. We are based just down the road in Long Beach, and we bring fully insured crews who work on metal roofs every day, not generalists who treat metal as a side job.

Metal Roofing in Compton (90220)

Compton sits on the flat coastal plain, and that flatness matters more than you might think. Water does not rush off a slope here, it sits, and that makes proper flashing and drainage critical. The typical Compton home is a single-story ranch or bungalow on a 50 by 130 foot lot, often with a detached garage at the back and a low-pitch roof that was originally covered in composition shingles. Those roofs absorb heat all day, and the attic becomes an oven. When we install a metal roof, we are not just replacing a surface, we are cutting the heat load on the whole house. We also deal with tight side-yard access, which means staging materials carefully and often hand-carrying panels to the roof. Older homes here sometimes have added rooms or patched-on sections, so we check the decking and structural attachment before we quote a retrofit.

Our team has worked on hundreds of roofs across the South Bay and Long Beach area, including many in Compton. We know the local building department's inspection rhythm and what they look for on a re-roof. We also know which neighborhoods have older homes with skip sheathing that needs to be addressed before a new metal roof goes on.

Our services in Compton

How a Job Works in Compton

Step 1: You call us at (562) 685-9725 or request a free estimate online. We schedule an on-site assessment, usually within a couple of days. We walk the roof, check the attic if accessible, and look at the flashing, fasteners, and decking. We give you a written estimate with options, not pressure.

Step 2: Once you approve, we pull the permit with the City of Compton and schedule the work. On tight lots, we plan material delivery and staging so we do not block your driveway or your neighbor's. If your home is in an area with HOA design review, we help you submit the panel profile and color for approval before we order materials. Most residential re-roofs take two to four days depending on size and complexity.

Step 3: We clean up every day, and when the job is done we do a final walkthrough with you. We use magnets to pick up screws and nails, and we make sure your gutters and downspouts are clear. We do not leave until you are satisfied.

Pricing in Compton depends on the size and pitch of your roof, the condition of the decking, and the type of metal you choose. For a typical 1,500 square foot ranch home, a metal roof installation starts around $8 per square foot, while a standing seam roof starts around $10 per square foot. If you are replacing an existing roof, that starts around $9 per square foot. A retrofit over existing shingles starts around $7 per square foot, but keep in mind that code limits how many layers you can have. Repairs start at $450, and leak repairs also start at $450. Screw replacement and re-fastening starts at $750. We also offer metal roof coating and painting starting at $2.50 per square foot, which is a good option for older metal roofs that are still sound but faded. For a free estimate tailored to your home, call (562) 685-9725.

My Compton ranch house has a low-pitch roof. Can I still get a metal roof?
Yes, but the panel profile matters. Low-pitch roofs need standing seam or a specific ribbed panel with a proper underlayment to handle water shedding. We check your pitch during the free estimate and recommend the right system. Many homes near Compton College and along the 91 freeway have this exact situation.
How fast can you respond to storm damage in Compton?
We offer free inspections and prioritize active leaks and wind damage. Call (562) 685-9725 and we will schedule an assessment as soon as possible, usually within 24 to 48 hours after a major storm. We can tarp and stabilize if needed before permanent repairs.
What does a metal roof cost for a typical Compton home?
For a 1,200 to 1,600 square foot home, most metal roof installations run between $9,000 and $16,000 depending on the material and complexity. Repairs are much less, starting at $450. The biggest factors are roof size, access, and whether we need to replace decking. We give you a firm written estimate after inspecting.
Do I need a permit for a metal roof in Compton?
Yes, a full replacement or re-roof typically requires a permit from the City of Compton Building and Safety Department. Requirements vary, so we verify with the city before starting. We handle the permit application and inspections as part of our service.
My neighbor's tree drops limbs on my roof. What are my options if there is damage?
First, document the damage with photos. In California, you are generally responsible for what falls on your property, but if the tree was known to be hazardous, there may be liability. We can inspect and repair the damage, and provide a report you can share with your insurance or your neighbor. We do not get involved in neighbor disputes, but we give you the facts.
Are you fully insured for work at my Compton property?
Yes. We carry general liability insurance and workers' compensation coverage for all our crews.
What maintenance does a metal roof need in Compton's climate?
Metal roofs are low maintenance, but the summer heat and winter rains mean you should check fasteners and flashing annually. We recommend a professional inspection every two to three years, especially after Santa Ana wind events. Keeping gutters clear and touching up scratches will extend the life of the finish.
Why choose us?

Trusted professionals in Long Beach

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Long Beach

All your work handled by qualified professionals in Long Beach

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

238+ Verified Client Reviews in Long Beach

⭐⭐⭐⭐⭐ 4.9/5 · 238 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Long Beach · Response within 24h · No commitment · ☎ (562) 685-9725

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Long Beach ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm