Serving the Long Beach area  ·  (562) 685-9725  ·  Open Mon-Sun 7am-7pm
📞 (562) 685-9725 Free Quote

Metal Roofing in Bellflower, CA (90706) · Local Professionals

Long Beach Metal Roofing · Fast response in Bellflower and the Long Beach area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+238Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Bellflower is a working town of 1950s stucco ranch homes and small apartment buildings, laid out on flat grid streets just north of the 91 Freeway and west of the 605. Most of the roofs here are original or second-generation composition shingles that have been baking in the sun for decades.

Homeowners in 90706 call Long Beach Metal Roofing because we know these low-pitch roofs and the heat that kills them. We are based in Long Beach, just a few minutes down Lakewood Boulevard, and we have replaced and repaired hundreds of roofs across Bellflower and the surrounding neighborhoods.

Metal Roofing in Bellflower (90706)

Bellflower sits on flat coastal plain ground with a high water table in some spots, so drainage and proper flashing matter more than on hillside lots. The housing stock is mostly 1940s to 1960s stucco ranches and small multi-family buildings with low-pitched roofs. Those low slopes are where composition shingles fail first: sun bakes them brittle, fasteners back out, and the first heavy rain finds every gap. We see a lot of wind-lifted ridge caps and failed pipe boots after Santa Ana wind events. Tight lot lines and detached garages mean we plan material staging carefully, and many homes have mature ficus or palm trees that drop debris and shade the roof, which can trap moisture and hide leaks.

Our team has worked on metal roofs throughout Bellflower and the surrounding areas, from simple corrugated panel replacements on rental units to standing seam upgrades on owner-occupied homes. We understand the local building department requirements and can help you navigate permits for a full re-roof or retrofit.

Our services in Bellflower

How a Job Works in Bellflower

Step 1: Call us at (562) 685-9725 or request a free estimate online. We will schedule an on-site assessment at your Bellflower property, usually within a day or two. We inspect the roof, attic if accessible, and flashing details, then give you a written scope and price. No pressure, no sales pitch.

Step 2: Once you approve, we pull the required permits from the City of Bellflower and schedule the work. Most residential re-roofs take two to four days. Our crews are insured and trained on metal systems. We protect your landscaping and coordinate with any HOA requirements. If we find dry rot or damaged sheathing, we show you photos and get approval before adding cost.

Step 3: After installation, we clean the site thoroughly, including magnet sweeps for nails, and walk the roof with you. We do not leave until you understand the system, the warranty, and the maintenance basics.

Metal roofing in Bellflower is priced by the square foot, and most jobs fall into a few common ranges. Corrugated and ribbed panel roofing starts around $5.50 per square foot, while standing seam runs from $10 per square foot. A full metal roof replacement typically starts at $9 per square foot, and a retrofit over existing shingles starts at $7 per square foot. Smaller repairs, like leak fixes or flashing work, start at $450, and screw replacement or re-fastening starts at $750. The final price depends on roof size, pitch, access, the condition of the existing roof, and how soon you need it done. We give free written estimates, so call (562) 685-9725 to get a real number for your Bellflower home.

My Bellflower ranch home has a low-pitch roof that leaks every winter. Can metal roofing fix that?
Yes. Low-slope roofs are common in Bellflower, and metal panels with proper underlayment and flashing handle them well. We often recommend a standing seam or corrugated panel system with a mechanical seam or exposed fasteners, depending on pitch. We also check and replace any rotten sheathing and make sure drainage is correct.
A storm just blew some shingles off my roof in Bellflower. How fast can you respond?
We offer free storm and wind damage inspections in Bellflower and the surrounding areas. Call (562) 685-9725 and we will schedule an inspection, usually within 24 to 48 hours. If it is an active leak, we can often provide temporary protection the same day and then schedule permanent repairs.
What does a typical metal roof replacement cost for a 1,500 square foot house in Bellflower?
For a 1,500 square foot home with a simple gable roof, a metal roof replacement typically starts around $9 per square foot, so you might be looking at roughly $13,500 and up, depending on panel type, pitch, and tear-off. Corrugated panel can be less, standing seam more. We give free estimates so you get an exact price.
Do I need a permit from the City of Bellflower for a metal roof replacement?
Yes, a full replacement or re-roof usually requires a building permit from the City of Bellflower. Requirements and fees vary, and inspection is required. We handle the permit application and inspections as part of the job, so you do not have to worry about the paperwork.
My neighbor's tree hangs over my roof in Bellflower. Can I trim it, and will my HOA care about the new roof color?
In California, you generally have the right to trim branches that extend over your property line, but check local rules and talk to your neighbor first. If you are in an HOA, the architectural committee usually must approve roof color and material before installation. We can provide product samples and specifications to help with the approval process.
Are you fully insured for work on my Bellflower property?
Yes. We carry general liability insurance and workers' compensation coverage for all employees. This protects you and your property.
How often should I have my metal roof inspected in Bellflower?
We recommend an inspection every two to three years, and after any major wind or rain event. Bellflower's sun and occasional Santa Ana winds can loosen fasteners and dry out sealants. A quick inspection can catch small issues before they become leaks. We offer free estimates for inspections.
Why choose us?

Trusted professionals in Long Beach

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Long Beach

All your work handled by qualified professionals in Long Beach

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

238+ Verified Client Reviews in Long Beach

⭐⭐⭐⭐⭐ 4.9/5 · 238 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Long Beach · Response within 24h · No commitment · ☎ (562) 685-9725

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Long Beach ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm