Serving the Long Beach area  ·  (562) 685-9725  ·  Open Mon-Sun 7am-7pm
📞 (562) 685-9725 Free Quote

Metal Roofing in Paramount, CA (90723) · Local Professionals

Long Beach Metal Roofing · Fast response in Paramount and the Long Beach area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+238Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Paramount is a working-class city of modest ranch homes and light industrial lots, where roofs take a beating from steady sun and wind off the coastal plain. Many of these houses were built in the 1940s through the 1960s with low-pitch composition shingles that are now at the end of their life, and the flat, sandy soil and tight side yards mean water has nowhere to go when a storm hits. If you live near Paramount Park or along Alondra Boulevard, you know the afternoon sun and the occasional Santa Ana wind that rattles old fasteners.

That is why homeowners in 90723 call Long Beach Metal Roofing. We are based just down the road in Long Beach, and we have spent years working on roofs across the South Bay, from the modest tracts off Paramount Boulevard to the small commercial buildings near the 710 freeway. We know the local building stock, the permit counter at Paramount City Hall, and the kind of wind and sun damage that shows up on roofs here.

Metal Roofing in Paramount (90723)

Paramount sits on flat ground with a high water table in some spots, so drainage and flashing details matter more than they might on a hillside. Most homes here are single-story ranches with attached garages, and many have low-pitch roofs that were originally shingled. When we install metal, we pay close attention to the transition between the roof and the stucco walls, and we make sure water sheds away from the foundation. The city also has a mix of older industrial buildings and small commercial strips, and we handle those corrugated and ribbed panel roofs too, where screw replacement and re-fastening are common maintenance items.

Our team has worked on dozens of roofs in Paramount and the surrounding areas, from simple leak repairs on aging shingle roofs to full standing seam installations. We understand the local climate: mild marine layer mornings, strong UV year-round, and the dry Santa Ana winds that can lift panels if fasteners are not set right. We also know that heavy winter rain, when it comes, finds every weak spot in flashing and seams.

Our services in Paramount

How a Job Works in Paramount

Step 1: You call us at (562) 685-9725 or request a free estimate online. We schedule a time to come out and inspect your roof, whether it is a small repair or a full replacement. We will look at the condition of the existing roof, check for leaks and wind damage, and talk with you about your options and budget. If you are dealing with an active leak, we prioritize that and can often get out the same day or next day.

Step 2: Once you approve the estimate, we pull the necessary permits from the City of Paramount. Permit requirements vary, so we verify with the building department before any work starts. For homes in tighter neighborhoods, we plan material deliveries to avoid blocking driveways and alleys. If your home is in an HOA, we help you get the design approval for panel profile and color before we order materials. The work itself is done by our insured crew, and we keep the site as tidy as possible each day.

Step 3: When the job is done, we walk the property with you, clean up all debris, and make sure you are satisfied. We use magnets to pick up screws and nails, and we haul away the old roofing materials. We do not consider the job finished until you are happy with the result.

Pricing for metal roofing in Paramount depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. As a ballpark, corrugated and ribbed panel roofing starts at $5.50 per square foot, metal roof installation starts at $8 per square foot, and standing seam starts at $10 per square foot. A metal roof over existing shingles (retrofit) starts at $7 per square foot, and full replacement starts at $9 per square foot. For repairs, metal roof leak repair starts at $450, screw replacement and re-fastening starts at $750, and flashing, chimney, and skylight repair starts at $600. We offer free estimates, so call (562) 685-9725 to get a precise quote for your home.

My house near Paramount Park has a low-pitch roof with old shingles. Can you install metal over them?
Yes, we can often install a metal roof over your existing shingles if the structure is sound and the number of layers meets code. This is a popular option for ranch homes in Paramount because it saves on disposal costs and speeds up the job. We will inspect your roof first to make sure it is a good candidate.
A windstorm just lifted some panels on my roof. How fast can you respond in Paramount?
We treat storm damage as a priority. Call us at (562) 685-9725 and we will schedule an inspection as soon as possible, often the same day or next day. We can secure the roof to prevent further damage and provide a written estimate for repairs.
What is the typical cost for a metal roof repair in Paramount?
Most metal roof repairs start at $450, but the final cost depends on the extent of the damage and access. Simple leak repairs are on the lower end, while larger repairs involving multiple panels or flashing can cost more. We give you a firm price before we start.
Do I need a permit for a metal roof replacement in Paramount?
Yes, a permit is typically required for a full replacement or re-roof. The City of Paramount Building Department sets the requirements, and they can vary based on the scope of work. We handle the permit application and inspections for you.
My HOA has rules about roof colors. Can you help with approval?
We can provide color samples and specification sheets for your HOA to review. We recommend getting approval before we order materials to avoid delays. We have worked with many HOAs in the area and can guide you through the process.
Are you insured for work on my Paramount property?
Yes, we are fully insured with general liability and workers' compensation coverage.
What maintenance does a metal roof need in Paramount's climate?
Metal roofs are low maintenance, but we recommend an annual inspection to check fasteners and flashing, especially after Santa Ana wind events. Cleaning gutters and removing debris helps prevent water damage. We offer free inspections to keep your roof in good shape.
Why choose us?

Trusted professionals in Long Beach

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Long Beach

All your work handled by qualified professionals in Long Beach

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

238+ Verified Client Reviews in Long Beach

⭐⭐⭐⭐⭐ 4.9/5 · 238 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Long Beach · Response within 24h · No commitment · ☎ (562) 685-9725

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Long Beach ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm