Serving the Long Beach area  ·  (562) 685-9725  ·  Open Mon-Sun 7am-7pm
📞 (562) 685-9725 Free Quote

Metal Roofing in Lomita, CA (90717) · Local Professionals

Long Beach Metal Roofing · Fast response in Lomita and the Long Beach area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+238Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Lomita is a small, tight-knit city tucked between Torrance and the Palos Verdes hills, where 1950s ranch homes and bungalows sit on compact lots just off Pacific Coast Highway. The ocean breeze and salt air are constant companions, and many of these older roofs have taken decades of coastal wind, marine layer moisture, and strong UV before finally giving out.

Homeowners in Lomita (90717) call Long Beach Metal Roofing because we understand the local housing stock and the specific ways roofs fail here. Whether you are near Lomita Park or over by the Pomona Valley Bank building on Narbonne Avenue, we bring insured crews and honest assessments to every job.

Metal Roofing in Lomita (90717)

Most Lomita properties are single-story ranches and bungalows built between the 1940s and 1960s, often with low-pitched composition shingle roofs that are now well past their service life. The flat lots and narrow driveways mean access can be tight, especially in the neighborhoods off 256th Street and around Lomita Boulevard. Coastal salt air accelerates corrosion on fasteners and flashing, and the marine layer keeps roofs damp many mornings, which can hide small leaks until they become major problems. We also see wind-lifted shingles and failed seals after Santa Ana wind events, and the occasional fallen limb from the mature ficus and palm trees that line many streets.

Our team has worked on dozens of homes in Lomita and the surrounding South Bay area, from simple repairs to full standing seam installations. We know the local building department quirks and can help you navigate permit requirements for a re-roof or retrofit.

Our services in Lomita

How a Job Works in Lomita

Step 1: You call us at (562) 685-9725 or request a free estimate online. We schedule an on-site assessment at your convenience, typically within a day or two. We inspect your roof, take photos, and explain what we find in plain language, with no pressure and no sales pitch. You get a written estimate before any work begins.

Step 2: Once you approve, we pull the necessary permits from the City of Lomita and schedule the crew. For tight lots, we plan material staging carefully to avoid blocking neighbors or driveways. If your home is in an HOA, we coordinate color and profile approvals ahead of time. Most installations take one to three days depending on the size and complexity of the roof.

Step 3: After the work is done, we do a thorough cleanup, including magnetic sweeps for nails and debris. We walk the roof with you, show you the finished work, and make sure you are completely satisfied before we leave. We leave your property clean and your roof ready for the next storm.

Pricing for metal roofing in Lomita depends on the size of your roof, its current condition, access, and the material you choose. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. If you are retrofitting over existing shingles, that starts at $7 per square foot, but keep in mind local code limits the number of layers you can have. Repairs like leak fixes start at $450, and screw replacement or re-fastening starts at $750. Coating and painting start at $2.50 per square foot, which can be a cost-effective way to extend the life of an older metal roof. We always provide a free, detailed estimate so you know exactly what to expect. Call (562) 685-9725 to schedule yours.

My 1950s ranch home near Lomita Park has original shingles that are curling and losing granules. Can you install a metal roof over them?
Yes, in many cases we can do a metal roof over shingles (retrofit) if your existing roof has only one layer and the decking is sound. We will inspect the structure and let you know if a full tear-off is required by code. This can save you money on disposal and labor. We serve the neighborhoods around Lomita Park regularly and can give you a free assessment.
A storm just blew some panels loose on my roof near the Lomita Boulevard on-ramp. How fast can you respond?
We prioritize storm and wind damage calls for Lomita homeowners. In most cases we can inspect the same day or the next morning, and we can often make temporary repairs to prevent further water intrusion until a permanent fix is scheduled. Call us at (562) 685-9725 and we will get a crew out as soon as possible.
What is the typical cost to repair a leak on a metal roof in Lomita?
Most metal roof leak repairs start at $450, but the final price depends on the source of the leak. Common issues we see in Lomita include failed fasteners, separated seams, and flashing gaps around chimneys or skylights. We will diagnose the problem and give you a firm quote before any work begins. If the leak is widespread, a larger repair or partial replacement may be more cost-effective.
Do I need a permit to replace my roof in Lomita, and how long does it take?
Yes, the City of Lomita typically requires a permit for a full roof replacement or re-roof. The exact requirements and fees vary, so we always verify with the building department before starting work. Permit approval can take a few days to a couple of weeks depending on the scope. We handle the paperwork and inspections for you as part of our service.
My neighbor's tree branches hang over my roof, and I am worried about liability if they cause damage. What are my options?
In California, you generally have the right to trim branches that overhang your property line, but it is best to talk with your neighbor first. If a branch from their tree falls and damages your roof, their insurance may be responsible, but it depends on the circumstances. We can inspect your roof for any existing damage and provide documentation. If you are in an HOA, check the CC&Rs for any rules about tree maintenance and roof damage responsibility.
Are you fully insured for roofing work at my Lomita home?
Yes, we are fully insured with both general liability and workers' compensation coverage. This protects you and your property in the unlikely event of an accident. We never cut corners on insurance, and our crews are trained and covered.
What maintenance should I do each year to keep my metal roof in good shape in Lomita's coastal climate?
We recommend an annual inspection, especially after the rainy season. Check for loose or missing fasteners, debris in gutters, and any signs of corrosion or sealant failure. Salt air can accelerate wear, so rinsing your roof occasionally with fresh water helps. Also, trim back any overhanging branches from ficus or palm trees to prevent punctures and debris buildup. We offer free estimates for inspections and can set up a maintenance plan if you prefer.
Why choose us?

Trusted professionals in Long Beach

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Long Beach

All your work handled by qualified professionals in Long Beach

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

238+ Verified Client Reviews in Long Beach

⭐⭐⭐⭐⭐ 4.9/5 · 238 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Long Beach · Response within 24h · No commitment · ☎ (562) 685-9725

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Long Beach ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm