Serving the Long Beach area  ·  (562) 685-9725  ·  Open Mon-Sun 7am-7pm
📞 (562) 685-9725 Free Quote

Metal Roofing in Long Beach, CA (90804) · Local Professionals

Long Beach Metal Roofing · Fast response in Long Beach and the Long Beach area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+238Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Long Beach is a city of distinct neighborhoods, from the Spanish Colonial Revival homes with red clay barrel tile roofs in Belmont Heights and Bluff Park to the 1950s stucco ranches with low-pitched composition shingles across Los Altos and the Eastside. The salt air, strong UV, and winter atmospheric-river rains take a toll on every roof here, especially on older homes near the ocean and along the canals of Naples and Belmont Shore.

That's why homeowners in ZIP 90804 and throughout Long Beach call Long Beach Metal Roofing. We understand the local building stock, from Craftsman bungalows in Rose Park to newer townhomes near the harbor, and we install metal roofing systems that reflect heat, resist salt corrosion, and handle the occasional heavy downpour. Whether you're near Signal Hill or a few blocks from the beach, we provide honest assessments and durable solutions.

Metal Roofing in Long Beach (90804)

Long Beach sits on a flat coastal plain beside the Pacific, with a mix of historic and mid-century homes. In neighborhoods like California Heights and Bixby Knolls, steep-gabled Tudor and Spanish cottages often have complex rooflines that require careful flashing and panel layout. Waterfront properties in Naples and Belmont Shore face constant salt spray, which accelerates corrosion on fasteners and seams. Older stucco ranches in Wrigley and Lakewood Village often have low-slope roofs that are good candidates for metal retrofit over existing shingles, but only if the existing layers meet code. Our crews are trained to handle these local conditions, from tight lot access in older neighborhoods to HOA design reviews in planned communities.

We've been serving Long Beach and the surrounding areas for years, and we know the common failure points: fastener back-out on older metal roofs, seam separation after Santa Ana winds, and flashing gaps that show up during heavy winter rains. We use corrosion-resistant materials and proven installation methods to ensure your metal roof performs in this coastal environment.

Our services in Long Beach

How a Job Works in Long Beach

Step 1: Call us at (562) 685-9725 or request a free estimate online. We'll schedule an on-site assessment at your convenience, inspect your existing roof, discuss your options, and provide a detailed written estimate. We'll also help you understand permit requirements and HOA approval if applicable.

Step 2: Once you approve the estimate, we'll pull the necessary permits (we can guide you on what the City of Long Beach requires) and schedule the work. Our crew arrives on time, protects your landscaping, and works efficiently to minimize disruption. For homes with tight lot access, we plan material delivery and staging carefully to avoid blocking neighbors.

Step 3: After installation, we clean the site thoroughly, haul away all debris, and walk you through the finished roof. We don't consider the job done until you're satisfied. We also provide a warranty and maintenance tips to keep your metal roof in top shape.

Metal roofing costs in Long Beach vary based on the material, roof complexity, and access. For a typical 1,500-square-foot home, metal roof installation starts around $8 per square foot, standing seam from $10 per square foot, and metal roof replacement from $9 per square foot. If you're retrofitting over existing shingles, prices start at $7 per square foot. Repairs, such as leak fixes or flashing repairs, start at $450, and screw replacement starts at $750. Coating and painting start at $2.50 per square foot. These are ballpark figures; the actual cost depends on the size of your roof, its condition, accessibility, and urgency. We offer free estimates, so call (562) 685-9725 to get a precise quote for your Long Beach home.

My Spanish Revival home in Belmont Heights has original clay tile. Can I install metal roofing without removing the tile?
In many cases, yes, but it depends on the condition of the underlying structure and local code. We often recommend a retrofit with a metal shingle or standing seam system that mimics the look of tile, but we'll assess your roof's framing and the existing layers to ensure it's safe and up to code. We'll also check if your home is in a historic district that may have design review requirements.
A storm just blew some panels loose on my roof in Long Beach. How quickly can you respond?
We prioritize storm damage calls. Call us at (562) 685-9725, and we'll schedule an inspection as soon as possible, often within 24 to 48 hours. We'll secure the roof to prevent further damage and provide a repair estimate. We also document the damage for insurance claims if needed.
What's the average cost to replace a composition shingle roof with metal on a 1950s ranch home in Los Altos?
For a typical 1,200 to 1,800 square foot ranch, metal roof replacement starts around $9 per square foot, so you might be looking at $10,800 to $16,200 for the roof area. Factors like roof pitch, number of penetrations, and whether we need to remove existing shingles will affect the final price. We provide free estimates to give you an accurate number.
Do I need a permit to install a metal roof in Long Beach?
Yes, roofing permits are typically required for a full replacement or re-roof. The City of Long Beach website has information on permit requirements and fees, and we can help you navigate the process. We always recommend checking with the local building department to ensure compliance, especially if your home is in a historic district or HOA.
My HOA requires a specific roof color. Can you help with approval and installation?
Absolutely. We're familiar with many Long Beach HOAs and can provide color samples and documentation for your architectural review. We'll coordinate with your HOA to ensure the chosen metal roofing meets their guidelines. We also handle property line issues by respecting setbacks and obtaining any necessary neighbor consent for access.
Are you fully insured for roofing work in Long Beach?
Yes, we carry general liability and workers' compensation insurance for your protection. Our team is fully insured and committed to safe, professional work.
How often should I inspect my metal roof in Long Beach's coastal climate?
We recommend an annual inspection, especially after winter rains and Santa Ana wind events. Check for loose fasteners, debris accumulation in valleys, and signs of corrosion. A professional inspection can catch small issues before they become leaks. We offer free estimates for inspections and maintenance.
Why choose us?

Trusted professionals in Long Beach

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Long Beach

All your work handled by qualified professionals in Long Beach

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

238+ Verified Client Reviews in Long Beach

⭐⭐⭐⭐⭐ 4.9/5 · 238 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Long Beach · Response within 24h · No commitment · ☎ (562) 685-9725

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Long Beach ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm