Serving the Long Beach area  ·  (562) 685-9725  ·  Open Mon-Sun 7am-7pm
📞 (562) 685-9725 Free Quote

Metal Roofing in Cerritos, CA (90703) · Local Professionals

Long Beach Metal Roofing · Fast response in Cerritos and the Long Beach area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+238Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Cerritos is a city of well-kept 1960s and 1970s stucco homes, many still under their original roofs, laid out on generous lots along palm-lined streets near the Cerritos Center for the Performing Arts and the Cerritos Towne Center. If your roof is pushing fifty, you are not alone, and you are probably tired of patching the same spots every rainy season.

We are Long Beach Metal Roofing, and we serve Cerritos from just down the 605. Homeowners here in 90703 call us because we understand the local housing stock, we pull the right permits, and we install metal roofs that handle the summer heat and the occasional heavy winter rain without constant repairs.

Metal Roofing in Cerritos (90703)

Most Cerritos homes sit on flat, sandy lots with easy street access, but that does not mean the work is simple. The typical 1960s or 1970s stucco ranch or two-story has a low-pitch roof, often with original composition shingles that are now brittle and prone to wind damage. Many properties have mature trees, and leaf litter and debris collect in valleys and behind chimneys, trapping moisture against old flashing. When we install a metal roof here, we pay close attention to attic ventilation and underlayment, because the inland heat builds up fast under a low-pitch roof. We also check for dry rot at the fascia and eaves, which is common after decades of minor leaks. Panel profiles and colors need to fit the neighborhood look, and we help you choose a system that works with the existing stucco and trim.

Our team has worked on roofs across Cerritos and the surrounding Long Beach area, from simple re-roofs to full standing seam installations. We know the local building department’s inspection process and what it takes to get a project signed off without delays.

Our services in Cerritos

How a Job Works in Cerritos

Step 1: You call us at (562) 685-9725 or request a free estimate online. We schedule an on-site assessment at your Cerritos property, usually within a couple of days. We inspect the roof, attic, and flashing, measure the roof area, and talk through your options, whether that is a repair, a retrofit over existing shingles, or a full replacement. You get a written estimate with clear pricing and no pressure.

Step 2: Once you approve, we handle the permit application with the City of Cerritos and schedule the work. On installation day, our crew protects your landscaping and driveway, then removes the old roofing or prepares the surface for a retrofit. We coordinate with any HOA requirements you have and keep you informed on progress. Most residential roofs take a few days to a week, depending on size and weather.

Step 3: When the work is done, we do a thorough cleanup, magnet-sweep the yard and driveway for nails, and walk the project with you. We do not leave until you are satisfied and we have confirmed the final inspection.

Pricing for metal roofing in Cerritos depends on the size and pitch of your roof, the condition of the decking, and the material you choose. As a ballpark, corrugated or ribbed panel roofing starts around $5.50 per square foot, metal roof installation starts at $8 per square foot, and standing seam starts at $10 per square foot. A metal roof over existing shingles (retrofit) starts at $7 per square foot, which can save on tear-off costs. Repairs and leak fixes start at $450, and screw replacement or re-fastening starts at $750. For a typical 1,800 to 2,200 square foot Cerritos home, most full replacements fall in the low-to-mid five figures depending on the system. Call us at (562) 685-9725 for a free estimate tailored to your roof.

My 1970s stucco home in Cerritos still has the original shingle roof. Can you install metal over it?
In many cases, yes. A metal roof over shingles (retrofit) is often allowed if your roof has only one layer of shingles and the decking is sound. We will inspect the structure and flashing details first. This can save you the cost and mess of tear-off, and it adds an extra layer of protection. We will confirm local code limits during your free estimate.
A storm just lifted some panels on my roof in Cerritos. How fast can you respond?
We prioritize storm and wind damage calls in Cerritos. Call us at (562) 685-9725 and we will schedule an inspection as soon as possible, often the same day or next. We can secure the roof temporarily if needed and provide a written repair estimate. We also document damage for insurance claims if you need it.
What does a typical metal roof repair cost in Cerritos?
Most repairs, such as fixing a leak or replacing damaged flashing, start at $450. Screw replacement and re-fastening start at $750. The final cost depends on the extent of the damage, roof access, and material. We give you a firm quote before any work begins.
Do I need a permit for a metal roof in Cerritos?
Yes, a roofing permit is typically required for a full replacement or re-roof in Cerritos. Requirements and fees are set by the city, and inspection is part of the process. We handle the permit application for you. For specific rules, check with the City of Cerritos website or call the building department.
My HOA has design rules. Can you help with approval for a metal roof?
We can provide product specifications, color samples, and installation details for your HOA submission. Many Cerritos HOAs have guidelines on panel profiles and colors, and we will help you choose an option that meets them. We will also make sure the installation respects property lines and setbacks.
Are you fully insured for roofing work in Cerritos?
Yes. We carry general liability insurance and workers' compensation coverage for every job. Your property and our crew are protected.
How often should I have my metal roof inspected in Cerritos?
We recommend an inspection every two to three years, and after any major storm. In Cerritos, the summer heat and winter rains can loosen fasteners and wear sealant over time. A quick inspection can catch small issues before they become leaks. We offer free estimates for inspections.
Why choose us?

Trusted professionals in Long Beach

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Long Beach

All your work handled by qualified professionals in Long Beach

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

238+ Verified Client Reviews in Long Beach

⭐⭐⭐⭐⭐ 4.9/5 · 238 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Long Beach · Response within 24h · No commitment · ☎ (562) 685-9725

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Long Beach ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm