Serving the Long Beach area  ·  (562) 685-9725  ·  Open Mon-Sun 7am-7pm
📞 (562) 685-9725 Free Quote

Metal Roofing in Lakewood, CA (90713) · Local Professionals

Long Beach Metal Roofing · Fast response in Lakewood and the Long Beach area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+238Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Lakewood is a city of 1950s tract ranches, and those low-pitched shingle roofs are hitting the end of the road. Drive through Lakewood Village or the streets off Del Amo Boulevard and you'll see the same thing: original composition roofs that have survived decades of marine layer mornings and dry Santa Ana winds, now curling at the edges and losing granules.

Homeowners in 90713 call Long Beach Metal Roofing because we know this housing stock inside and out. We've worked on these low-slope ranches from Mayfair to the Lakewood Country Club area, and we know how to retrofit metal over shingles without creating drainage problems. If your roof is due, call (562) 685-9725 for a free inspection.

Metal Roofing in Lakewood (90713)

Lakewood's flat coastal plain and tight tract lots create specific challenges. The original 1950s ranches often have low-pitch roofs with minimal attic ventilation, which means any retrofit has to account for condensation and heat buildup. Lot lines are close, so staging materials and maneuvering crews requires planning, especially on streets near Mayfair Park where parking is limited. The salt air from the coast isn't as aggressive as in Belmont Shore, but it still works on fasteners and flashing, and the dry Santa Ana winds that funnel through the region can loosen panels over time. We also see a lot of original roof-to-wall flashing that has failed, so we always inspect and replace it during installation.

Our team has been serving Lakewood and the surrounding Long Beach area for years. We understand the permitting process through the City of Lakewood and can help you navigate it. Whether you're upgrading a ranch near Lakewood Center or repairing a metal roof on a commercial building along Carson Street, we bring the same attention to detail.

Our services in Lakewood

How a Job Works in Lakewood

Step 1: You call (562) 685-9725 or request a free estimate online. We schedule an on-site assessment at your convenience, typically within a few days. We'll inspect your existing roof, check the attic and flashing, and discuss your options, from a full replacement to a retrofit over shingles. You get a written estimate with no pressure.

Step 2: Once you approve, we pull the necessary permits from the City of Lakewood and schedule the work. On installation day, our crew arrives early to beat the afternoon heat. For tight lots, we coordinate with neighbors for material staging and use compact equipment where needed. If your home is in an HOA, we'll provide the documentation they require for approval. Most residential roofs take two to five days depending on size and complexity.

Step 3: After installation, we do a thorough cleanup, including magnet sweeping for nails and debris removal. We walk the roof with you to show you the finished work and answer any questions. We don't consider the job done until you're satisfied.

Pricing for metal roofing in Lakewood depends on the size and pitch of your roof, the material you choose, and the condition of the existing structure. For a typical 1,500-square-foot ranch, metal roof installation starts around $8 per square foot, while standing seam runs about $10 per square foot. A retrofit over existing shingles can start at $7 per square foot, which is often the most cost-effective option for Lakewood's 1950s homes. Repairs, such as fixing a leak or replacing fasteners, start at $450. We provide free estimates and will give you a clear, itemized quote so you know exactly what you're paying for. Call (562) 685-9725 to schedule yours.

My Lakewood ranch has a low-pitch roof. Can you install metal over the existing shingles?
Yes, for many homes. Lakewood's 1950s ranches often have roofs with a pitch as low as 2:12 or 3:12. We can install a metal roof over shingles if the existing roof is structurally sound and the local code allows it (usually up to two layers). We'll inspect your roof and let you know if a retrofit is feasible or if a tear-off is needed.
How quickly can you respond to storm damage in Lakewood?
We offer free inspections for storm and wind damage and prioritize emergency calls. After a Santa Ana wind event or heavy rain, call (562) 685-9725 and we'll schedule an inspection as soon as possible, often within 24 to 48 hours. We can provide temporary fixes if needed and work with your insurance company on documentation.
What does a metal roof cost for a typical Lakewood home?
For a standard 1,500-square-foot ranch, expect a starting range of $8 to $10 per square foot for installation, depending on the metal type and profile. A retrofit over shingles can start at $7 per square foot. Repairs start at $450. We provide free, no-obligation estimates so you can see exact pricing for your home.
Do I need a permit for a metal roof in Lakewood?
Yes, a roofing permit is typically required for a full replacement or re-roof. The City of Lakewood handles permitting, and requirements can vary based on your project. We can guide you through the process or pull the permit for you. For specific details, check the City of Lakewood website or call the building department.
My HOA has design rules. Can you help with approval for a metal roof?
Absolutely. Many Lakewood HOAs have guidelines on roof color and style. We can provide product samples, specification sheets, and installation details to submit to your HOA. We'll coordinate with you to ensure the chosen metal roof meets your HOA's requirements before we order materials.
Are you fully insured for work in Lakewood?
Yes, we carry general liability insurance and workers' compensation coverage. Your property and our crew are protected.
How often should I inspect my metal roof in Lakewood?
We recommend an annual inspection, especially after the rainy season and before Santa Ana winds. Check for loose fasteners, debris buildup in valleys, and any signs of flashing wear. We offer free inspections to catch small issues before they become leaks. Regular maintenance can extend the life of your metal roof by decades.
Why choose us?

Trusted professionals in Long Beach

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Long Beach

All your work handled by qualified professionals in Long Beach

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

238+ Verified Client Reviews in Long Beach

⭐⭐⭐⭐⭐ 4.9/5 · 238 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Long Beach · Response within 24h · No commitment · ☎ (562) 685-9725

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Long Beach ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm