Serving the Long Beach area  ·  (562) 685-9725  ·  Open Mon-Sun 7am-7pm
📞 (562) 685-9725 Free Quote

Metal Roofing in Whittier, CA (90602) · Local Professionals

Long Beach Metal Roofing · Fast response in Whittier and the Long Beach area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+238Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Whittier is a city of hillside Craftsman bungalows and Spanish Revival homes, many built in the 1920s and 1930s, with steep gables and clay tile roofs that have seen decades of sun and Santa Ana winds. If you live near Uptown or the historic districts, you know the look: mature trees, narrow streets, and roofs that were never designed for the fire-ember exposure that comes with being this close to the Puente Hills.

Homeowners in Whittier (90602) call Long Beach Metal Roofing because we understand the specific challenges here: aging wood and tile roofs, fire-resistant material needs, and the tight access that comes with older neighborhoods. We are based in Long Beach, just down the 605, and we bring insured crews who have worked on homes from the Friendly Hills area to the Whittier Greenway Trail.

Metal Roofing in Whittier (90602)

Whittier's terrain is a big part of the job. The city rises from the flat coastal plain into the Puente Hills, so many homes sit on sloped lots with mature landscaping and narrow driveways. That means we often deal with steep pitches, limited staging space, and the need to protect existing hardscaping during installation. The housing stock is just as varied: you have 1920s Spanish Revival cottages with original clay tile near the Whittier College area, mid-century ranches in the East Whittier flatlands, and newer custom homes up in Friendly Hills. Each roof type demands a different approach, from matching the profile of existing barrel tile to reinforcing framing for heavier stone-coated steel.

Our team has been serving Whittier and the surrounding Long Beach area for years, and we know the local building department's requirements. We also understand the fire-ember exposure near the Puente Hills, which is why many homeowners here choose Stone-Coated Steel Roofing or Standing Seam Metal Roofing for its Class A fire rating and ability to shed embers. We handle everything from initial inspection to final cleanup, and we make sure your new roof meets both city codes and your HOA's design guidelines.

Our services in Whittier

How a Job Works in Whittier

Step 1: It starts with a phone call to (562) 685-9725 or a request through our website. We schedule a free on-site assessment at your Whittier property, usually within a day or two. Our estimator will walk the roof, check the attic if accessible, and take photos to document the condition. You'll get a written estimate with material options and a clear timeline, no pressure.

Step 2: Once you approve, we pull the necessary permits from the City of Whittier. You can verify local requirements on the City of Whittier website if you want to double-check. Our crews arrive early, protect your landscaping with tarps, and work efficiently to minimize disruption. For hillside homes, we use specialized staging to handle steep grades safely. If your home is in a historic district or HOA, we coordinate color and profile approvals before ordering materials.

Step 3: After installation, we do a thorough cleanup, including magnet sweeps for nails and debris removal. We walk the finished roof with you, point out key details like flashing and fasteners, and provide a warranty packet. We leave your property clean and your roof ready for decades of Whittier weather.

Pricing in Whittier depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. For a typical 1,500 to 2,000 square foot home, metal roof installation starts at around $8 per square foot, standing seam at $10, and stone-coated steel at $9. If you're replacing an old roof, removal and disposal add to the cost, but we can also do a metal roof over shingles (retrofit) starting at $7 per square foot, which saves on tear-off. Repairs like leak fixes start at $450, and screw replacement starts at $750. These are ballpark figures; the only way to get an accurate number is a free estimate. Call (562) 685-9725 to schedule yours.

My Whittier home has original clay tile on a steep pitch. Can you install metal over it, or do I need a full tear-off?
In most cases, we recommend a full tear-off for clay tile because the weight and profile make retrofitting tricky. But we can evaluate your specific roof. For hillside homes with steep pitches, we use specialized equipment to safely remove and dispose of the old tile, then install a new metal roof with proper underlayment. We'll give you a clear recommendation after inspecting your roof.
A windstorm just lifted some panels on my roof in Whittier. How fast can you respond?
We prioritize storm damage calls in Whittier and the surrounding areas. Call (562) 685-9725 and we'll schedule an inspection, often same-day or next-day. We can tarp the affected area to prevent further water damage and provide a written estimate for permanent repairs. We work with your insurance company if you're filing a claim.
What's the typical cost for a metal roof on a 1,800 square foot home in Whittier?
For a home that size, most metal roof installations run between $14,000 and $20,000 depending on material, pitch, and complexity. Standing seam tends to be at the higher end, while corrugated panels are more budget-friendly. We provide a detailed estimate after a free inspection so you know exactly what to expect.
Do I need a permit for a metal roof in Whittier, and how long does it take?
Yes, a permit is typically required for a full replacement or re-roof. The City of Whittier Building Department handles these, and turnaround times vary. We handle the permit application for you and schedule inspections as required. You can find more details on the City of Whittier website, but we'll guide you through the process.
My HOA has strict rules about roof color and style. Can you help with approval?
Absolutely. We work with HOAs in Whittier regularly. We can provide material samples, color chips, and specifications to submit for approval. If your HOA requires a specific profile, we'll source it. We recommend getting approval before ordering materials to avoid delays.
Are you fully insured for work at my Whittier home?
Yes, we carry general liability and workers' compensation insurance.
How often should I inspect my metal roof in Whittier, and what should I look for?
We recommend an annual inspection, especially after Santa Ana wind events or heavy winter rains. Check for loose fasteners, lifted panels, or debris accumulation in valleys. Also look for signs of water intrusion around flashing and penetrations. If you're not comfortable on the roof, call us for a free inspection.
Why choose us?

Trusted professionals in Long Beach

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Long Beach

All your work handled by qualified professionals in Long Beach

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

238+ Verified Client Reviews in Long Beach

⭐⭐⭐⭐⭐ 4.9/5 · 238 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Long Beach · Response within 24h · No commitment · ☎ (562) 685-9725

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Long Beach ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm